Re: Need help on hardware

[Sean Chou <ychou>]

> able to establish communications.  I have a 750 mono,
> and the scanner was hooked up to the serial port, and I
> tried setting the program to address com1 and com2-
> neither seemed to work.  Any ideas? Is there anything

First, does the scanner need a 16550 UART? I shouldn't 
think so, but you never know.

Having checked that it doesn't, have you made sure that
the power to your serial port is on? If so, check your
BIOS also to see what COM port your external serial
port is set to.  It's most likely COM1.