SPONSORED LINKS
I've been able to send FAXes with an XJ1144 with no problems at
all, using the Easy Playing PCMCIA drivers and the Windows FAX
software that came with the modem (Eclipse?). I've had DOSKEY
installed all along. So, I don't think you've found the ultimate
solution. Following is my configuration. Enjoy! Ron.
Note: I have moved most of my IBM and ThinkPad related directories to
live under the C:\IBM directory, to help clean up my root directory.
You will likely need to change most/all of the paths below that refer
to the C:\IBM directory. (IBM should have done it this way in the
first place!)
----- config.sys -----
buffers=20
SHELL=C:\COMMAND.COM C:\ /E:1024 /p
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE NOEMS RAM X=B000-C0FF I=C100-E5FF X=E600-EFFF
H=64 A=7 D=32
DEVICEhigh=C:\IBM\THINKPAD\IBMDSS01.SYS /S0=2
DEVICEhigh=C:\IBM\THINKPAD\IBMDOSCS.SYS
DEVICEhigh=C:\IBM\THINKPAD\DICRMU01.SYS /MA=C000-C0FF
DEVICEhigh=C:\IBM\THINKPAD\$ICPMDOS.SYS /MODEMOFF
DEVICEhigh=C:\DOS\POWER.EXE ADV:MAX
DEVICEhigh=C:\IBM\THINKPAD\AUTODRV.SYS C:\IBM\THINKPAD\AUTODRV.INI
FILES=60
STACKS=9,256
dos=high,umb
LASTDRIVE=J
BREAK=ON
DEVICEhigh=C:\DOS\SETVER.EXE
DEVICEhigh=C:\DOS\ANSI.SYS
DEVICEhigh=C:\IBMVESA\VESA.EXE
----- autoexec.bat -----
@ECHO OFF
PROMPT $P$G
PATH=C:\ODAPI;c:\mks\bin;c:\lbin;C:\WINDOWS;C:\IBM\THINKPAD;C:\DOS
[SET commands]
LH C:\DOS\SMARTDRV.EXE
LH C:\DOS\MOUSE.COM
LH C:\DOS\SHARE.EXE /F:4096 /L:40
LH C:\DOS\DOSKEY.COM
CALL C:\DOS\IBMAVDR.BAT C:\DOS\