SPONSORED LINKS
In message Tue, 29 Nov 94 13:59:27 -0500, Chris Hanson <cph@martigny.ai.mit.edu> writes: >> I have a 3com etherlink III pcmcia 10base-T in slot 1. >> >> I have installed warp and tcp/ip 2.0 for os/2 >> everything seems ok, but then at the end it tells me that it can't find >> the adapter. I have configured tcp/ip to enable adapter 1 and laps is >> configured for adapter 0 (the lowest number). and it doesn't work > I have exactly the same configuration (well, 10base2 actually) and had > the same experience. I fixed it by installing two files from the > "beta" OS/2 PCMCIA drivers, which are available from > "software.watson.ibm.com" as the file "pub/os2/ews/os2pcm.zip". I recommend you give Sang a copy of your config.sys. I spent 10 hours installing and reinstalling TCP/IP and the IBM PCMCIA ethernet software. I finally compared with someone else's config.sys and got it to work by playing with the order things were being loaded. It's really kinda strange. You have to load half the PCMCIA drivers first, then NDIS, then TCPIP, then the other half of the PCMCIA drivers. _____________________________________________________________________ |\_____________________________________________________________________\ | | | | | John H. Kim "None of what you are seeing is actually happening." | | | jokim@mit.edu | | | jokim@uni.uiuc.edu - disclaimer for TV movie 'Without Warning' | \|_____________________________________________________________________|