SPONSORED LINKS
FORWARDED MESSAGE from Jack Schudel (SCHUDEL @ SMTP {SCHUDEL@ufl.edu}) at
12/9/94 11:02p
I have a TP500 with Megahertz XJACK Gold 14.4 modem.
If I setup a com or fax program to answer an incoming call, the
TP500 goes into suspend after the first ring.
(Actually, it is a weird suspend mode, since it requires a keypress
to get out of it... pushing the TrackPoint will not remove it from
suspend.)
If goes into suspend even if I go into setup and disable power
management.
This is true in both native DOS and OS/2 Warp.
Could some of you try this and let me know if this happens to you?
Maybe with different modem cards?
Any suggestons on how to track down a solution to this?
/Thanks. -jack
***** NOTES from DAVID CHO (DCHO @ KENTNET) at 12/10/94 10:07p
finally, something that i might know about...
i had the same problem and found a solution. here it is. i hope it
works for you:
in your config.sys file, you should have a line that looks something like
this: device=c:\pcmplus\pcmss.exe /S0=1 /TP500
if you don't have the "/tp500" switch at the end, that's probably the
problem.
you probably got this problem b/c you installed the drivers that came
with megahrtz. i don't think the drivers from megahrtz adds the switch
at the end. ever since i discovered that, even though i found a "newer"
version of the phoenix drivers at the ibm bbs, i haven't the courage to
install them. i now have no problems with my modem (though i eventually
returned the megahrtz modem for an Angia modem).
btw, if anyone has installed the newer version of the phoenix drivers (or
if anything i said above is totally off base), then please e-mail and
enlighten me. thanks
David (ignorant but trying) Cho