SPONSORED LINKS
Several people have requested my config file for 1024x768. I was
afraid I would have to disappoint them because when I went back to
check it, it no longer worked. What I discovered is that you have
to power the machine on with the monitor connected so it comes up
with the LCD screen off for this to work. Otherwise it goes into
a fixed 640x480 mode, presumably for the safety of the LCD circuitry.
Here it is, the refresh rate is a little slow but it works on my
755CE. (Be careful, I fudged the horizontal and vertical refresh
rates and stuff like that.)
# $XFree86: xc/programs/Xserver/hw/xfree86/XF86Conf.cpp,v 3.6 1994/09/26 15:30:19 dawes Exp $
#
# Copyright (c) 1994 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file. This man page is installed as /usr/X11R6/man/man5/XF86Config.5x
# **********************************************************************
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
# XCOMM FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# XCOMM FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
# XCOMM FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# XCOMM FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# DontZap
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "Keyboard"
Protocol "Standard"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Protocol "Xqueue"
AutoRepeat 500 5
ServerNumLock
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1))
# Xleds 1 2 3
# To set the LeftAlt to Meta, RightAlt key to ModeShift,
# RightCtl key to Compose, and ScrollLock key to ModeLock:
# LeftAlt Meta
# RightAlt ModeShift
# RightCtl Compose
# ScrollLock ModeLock
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "Pointer"
Protocol "PS/2"
Device "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Buttons
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic Monitor"
VendorName "Unknown"
ModelName "Unknown"
# Bandwidth is in MHz unless units are specified
Bandwidth 25.2
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 31.5 # typical for a single frequency fixed-sync monitor
HorizSync 30-64 # multisync
# HorizSync 31.5, 35.38 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# VertRefresh 60 # typical for a single frequency fixed-sync monitor
VertRefresh 50-100 # multisync
# VertRefresh 60, 65 # multiple fixed sync frequencies
# VertRefresh 40-50, 80-100 # multiple ranges of sync frequencies
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
# These two are equivalent
# ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525
Mode "640x480"
DotClock 28.3
HTimings 640 664 760 800
VTimings 480 491 493 525
EndMode
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
Mode "1024x768i"
DotClock 44
HTimings 1024 1048 1208 1264
VTimings 768 776 784 817
Flags "Interlace"
EndMode
# Mode "1024x768"
# DotClock 44
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# EndMode
ModeLine "800x600" 44 800 856 976 1040 600 637 643 666 -hsync -vsync
ModeLine "800x600" 65 800 856 976 1040 600 637 643 666 -hsync -vsync
ModeLine "1024x768" 65 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# ModeLine "1024x768" 85 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "Generic VGA"
VendorName "Unknown"
BoardName "Unknown"
Chipset "generic"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
Section "Device"
# SVGA server auto-detected chipset
Identifier "Generic SVGA"
VendorName "Unknown"
BoardName "Unknown"
# Clocks 28.35 28.32 28.32 28.32 28.35 28.68 28.32 28.32 28.36 28.33 28.33 28.33 28.33 28.33 28.33 28.33 49.85
EndSection
# Section "Device"
# Identifier "Any Trident TVGA 9000"
# VendorName "Trident"
# BoardName "TVGA 9000"
# Chipset "tvga9000"
# VideoRam 512
# Clocks 25 28 45 36 57 65 50 40 25 28 0 45 72 77 80 75
# EndSection
# Section "Device"
# Identifier "Actix GE32+ 2MB"
# VendorName "Actix"
# BoardName "GE32+"
# Ramdac "ATT20C490"
# Dacspeed 110
# Option "dac_8_bit"
# Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0
# Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0
# EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The colour SVGA server
Section "Screen"
Driver "svga"
Device "Generic SVGA"
Monitor "Generic Monitor"
Subsection "Display"
Depth 8
Modes "1024x768"
# Modes "800x600"
# Modes "640x480"
ViewPort 0 0
#Virtual 800 600
EndSubsection
EndSection
# The 16-colour VGA server
Section "Screen"
Driver "vga16"
Device "Generic VGA"
Monitor "Generic Monitor"
Subsection "Display"
Modes "640x480"
ViewPort 0 0
Virtual 800 600
EndSubsection
EndSection
# The Mono server
Section "Screen"
Driver "vga2"
Device "Generic VGA"
Monitor "Generic Monitor"
Subsection "Display"
Modes "640x480"
ViewPort 0 0
Virtual 800 600
EndSubsection
EndSection
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32)
# Section "Screen"
# Driver "accel"
# Device "Actix GE32+ 2MB"
# Monitor "Generic Monitor"
# Subsection "Display"
# Depth 8
# Modes "640x480"
# ViewPort 0 0
# Virtual 1280 1024
# EndSubsection
# SubSection "Display"
# Depth 16
# Weight 565
# Modes "640x480"
# ViewPort 0 0
# Virtual 1024 768
# EndSubsection
# EndSection