SPONSORED LINKS
I am running a TP750Ce with a Dock-1 I just installed Windows 95 (final beta release) from scratch (that is, I did a DELTREE on my WINDOWS directory). I did the following: 1) installed Windows 95 from CD-ROM taking all the defaults At this point, Everything kinda worked, except my PCMCIA slots, sound, and COM port. 2) I installed the Audio Features from the Audio Features Diskette v 1.31 It didn't work at first, so I editted SYSTEM.INI and put the following in [386enh] section: device=tpaudvxd.386 All the other sections in SYSTEM.INI were set up OK, and all the files were copied to the right place. Just the [386enh] section was wrong. 3) I "Added new Hardware", and told it I had a COMMUNICATION port. It didn't believe me at first, so I editted SYSTEM.INI and put the following in [386enh] section: ;device=*vcd device=ibmvcd.386 Note that I commented out the device=*.vcd I copied ibmvcd.386 from the IBM Utility Disk 2 (of 2) release 2.00 to \WINDOWS\SYSTEM it works. 4) I went into control panel, PCMCIA, and told it that it was supposed to be on when docked. I do not remember the exact steps... I hacked at it until it worked... So the question is... Did I miss anything? ---------------------------------------------------- Timothy Nelson Chief Scientist, SHL Systemhouse Corp. internet: tnelson@shl.com ----------------------------------------------------