SPONSORED LINKS
Ok, I've been running without a monitor up til now and have been happily ignoring and deleting everything that came across this list on SVGA under Warp and Win-OS/2. Wouldn't you know it, right after I deleted the latest batch, I find out I'm doing a presentation next week on a 1024x768 LCD projector. I'll be using Lotus Freelance for Windows so I need to get external SVGA support under Win-OS/2 working. Here's the situation til now: I installed Warp with Win-OS/2 in VGA mode. Tested Win-OS/2 in VGA mode -- worked OK. Connected an external monitor and installed WD90C24 drivers. Changed resolution to 1024x768x256. OS/2 came up in 1024x768x256, but double-clicking the Win-OS/2 full screen icon results in a "Cannot start -- make sure the path is correct..." error. I was able to start Win-OS/2 by typing "win" from a DOS full screen prompt, but it came up 640x480x???. I switched back to 640x480x256 and was still unable to start Win-OS/2. I suspect if I went back to VGA everything would work OK, but that defeats the purpose of all these contortions I'm going through. Has anyone got a setup similar to this? I'm on a TP750 mono. Ideally I'd like 1024x768 in both OS/2 and Win-OS/2 when hooked up to an external monitor, with the TP autosensing and dropping back to 640x480x256 for both when there's no monitor attached. I'll settle for 1024x768x256 in *any* way under Win-OS/2. Help! -- John H. Kim jokim@mit.edu