OS/2 Warp - Changing Resolutions

[Chris Hanson <cph@martigny.ai.mit.edu>]

   Date: Fri, 25 Aug 95 10:30:28 EDT
   From: Wilson Yip  <wyip@nicotra.com.sg>  (Wilson Yip)

   According to the 750 manual there should be a "ChangRes" and a
   "SetCRT" batch file after installing the latest drivers from
   PCCO (ver 1.33) but these drivers are for OS/2 2.1 only, the
   docs accompanying the drivers state that if the user is using
   Warp, the video drivers from Warp should be used. My drivers
   were installed when installing Warp but there is no indication
   of how to get higher resolution or is this not possible?

In the Warp user's guide, see chapter 16, "Video Procedures".

Basically, with the external display connected and with the video
switched to use that display, you must run the command "svga on" in a
DOS full-screen session.  After this is done, the "System" icon in the
"System Setup" folder will have three different resolution settings
for you to choose from.

The "ChangRes" and "SetCRT" commands don't exist in Warp.  Everything
is done by means of the "System" icon in the "System Setup" folder,
and the "Display" icon in the "ThinkPad Features" folder.