SPONSORED LINKS
If my memory works.., I think the way to fix this is to install the Thinkpad Setup windows programs (available off the original HD, or from IBM ftp), and check the initialisation of the COM ports. I remember that Windows 95 had major problems with running out of IRQ's on my 755CD as every thing loaded was fighting for one. If you use this to disable the offending COM port, and INFARED ports, you'll find that Win95 should stop detecting things that aren't really there. I remember turning them off in BIOS config didn't work... I think to use the MWave stuff I simply installed the original Windows Drivers from IBM (7 disk set). This worked for me with sound, although I don't use the internal modem. Hope this helps. Alex At 09:21 02/01/96 -0800, you wrote: >>>From: lafleur@qualcomm.com (Tom Lafleur) >>Subject: Re: IBM >>Content-Type: text/plain; charset="us-ascii" >> >>I have the 755 setup with a dual boot win95 system... Win95 keeps trying to >>add a comm port that it can't do a config on and then turns it offline... >>may be the modem port of the Mwave card... It also see the mwave card, but >>can't find any drivers for the sound part of the card... so no >>multimeda-support nor any modem drivers... >> >>do you know of any updated drivers from IBM or others to fix this ?? I >>looked at IBM web sit, but found nothing that would be of any help... >> >> >>---------------------------------------------- >>Tom Lafleur >>Qualcomm Inc. >>(619) 658-3738 >>lafleur@qualcomm.com >> >> >> >> > >Gary Jacobs >gjacobs@qualcomm.com >(619)658-4069 voice >(619)658-2120 fax > > >