SPONSORED LINKS
> > [...] suggest where to turn or what to do to > > make the serial port function? I just had this problem on a 755 CD. The solution was to run ps2 ir disable to disable the IR port (under DOS) then power the machine off and back on holding the F1 key to get to Easy Setup. Go to Config and Serial and set the serial port to port 1. Savem exit and restart and you should be there. Hope this helps, Tim -- Tim Melton tam@questconsult.com Quest Consultants Inc. http://www.questconsult.com/ P.O. Box 721387 (405) 329-7475 Norman, OK 73070-8069 Fax: (405) 329-7734