SPONSORED LINKS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: AC Power Connection for TP755CD



Daniel,

My client has several IBM Thinkpad 755XX models and the AC adapter has been 
problematic on a few.  The answer to your question is however that your 
Thinkpad more than likely is working just fine.  The problem is with the tip of 
the AC plug that attaches to your Thinkpad.

It is a removeable plug that IBM normally replaces.  If you can't afford the 
time to drop into an IBM service depot, just use a pointy device and wedge the 
end off.  The contacts on the side of the plug need to be crimped outward a bit 
and then just reattach the plug back into the socket.

I experienced this problem first hand and watched them repair it.  Like I said, 
they normally replace the part but if you can't afford the time, it's something 
than can be easily accomplished in 2 minutes.

By the way, if anyone has a loose display panel on their 755XX model, don't 
wait to get it tightened.  While it is possible to tighten the display panel 
yourself, it can be troublesome to get the cover off.  It's best left up to the 
IBM techies who can do it within 10 minutes.  No need to drop off your machine, 
as they can repair it on site.  The reason for tightening the display?  The 
technician said, if it gets any looser, it could damage the hinge mechanism.  I 
watched them tighten my 755CX on-site and noticed the 4 screws which required 
tightening.  Consider yourself warned! :)

Hope this is helpful... patrick

> Hi, I have a 755CD which is about 6 months old.  The connection for the AC 
> adapter is becoming flaky.  I can't always get a good connection when I 
> plug it in to the back of the 755CD, I usually have to wiggle the plug on
> the back of the thinkpad.  Has anyone else had this problem?  Can IBM fix
> it?  Also if I have to send my tp in, should I remove things like the hard
> drive, extra memory, etc?
> 
> Thanks,
> Daniel Smith
> 

 
______________________________________________________________________

        Patrick Hong Systems Management & Consulting Inc.

        phong@phsmc.synapse.net            (613) 769-1544
______________________________________________________________________