SPONSORED LINKS
> I have a ThinkPad 755C and a Dock II docking station. I have a > reasonably nice NEC MultiSync XE17 monitor attached to the Dock II. > > However, I have been unable to date to get the monitor to display > at anything other than a 60Hz vertical scan rate. > > Is it possible to cause an external monitor attached to a Dock II > and TP755C to display at a more reasonable scan rate, such as 72Hz? I am using TP750Cs without docking station. Sometimes the TP will be attached to a SONY Multiscan 15sf monitor. Running Windows 95 at VGA mode flicker is noticeable. At 800X600 256 color and the flicker is pronounced. Someone told me to try the IBM video utility to change to higher scan rate configuration. After tuning it becomes flicker free even at 800X600. I've tried 1024X768 but the rate cannot go beyond 60Hz. The flicker is still noticeable. So I stick to 800X600 instead. The utility program will insert the line below into the CONFIG.SYS. It runs before Win95 loads itself. I haven't tried OS/2, though. The video utility version is 1.33 dated 12-05-94. It was downloaded from ftp://ftp.pcco.ibm.com/pub/mobiles/vftps133.exe DEVICE=C:\IBMVESA\VESA.EXE Eric Wong