SPONSORED LINKS
At 01:56 PM 3/22/96 PST, you wrote: >I have a TP755CX, I only seem to have com1 active. I think com1 is the Mwave dsp modem. >How could I activate com2 so that I can use the RS232 connector at the back? or TP755CX >only come with one com port? You need to use the setup to enable the port, but you also need to disable a device with the PS2 command. I had this same problem, and I ended up disabling the IR device via software, and enabling the RS-232 port via hardware. #---------------------------------------------------------------------# # ** Trying to find the meaning of life and our existance, this is ** # #Mark Bell * 800 College Drive #104 * Vineland, NJ * 08360 *6093274029# #--------------->Email: bytehead@interramp.com<-----------------------#