SPONSORED LINKS
Thanks for your suggestion, but I have already tried it. It did not
work, unfortunately.
Shinichi
>>>>> "Steve" == Steve Hultquist <ssh@wwsi.com> writes:
Steve> At 10:05 AM 7/9/96 -0400, Shinichi Sakata wrote:
>> The only useful information I got in the phone call was that
>> the 3com drivers only check the connected transceiver at the
>> boot time. When the card service tells the drive to
>> reinitialize the network card, the driver uses the previously
>> obtained information about the transceiver instead of checking
>> it again. The tech guy could not explain why the driver was
>> designed in this way.
Steve> You might be able to use card services such that you could
Steve> unplug the card, have the drivers unloaded, then plug it
Steve> back in and have them reload (and re-check). I'm not
Steve> certain (I know this would work on 95, but I haven't used
Steve> OS/2 PnP support for PC Cards enough lately!), but it's
Steve> worth a try!
Steve> ssh -- Steve Hultquist Founder Worldwide Solutions, Inc.
Steve> Web, Internet, LANs, WANs, Routing, Switching, Unix, PCs,
Steve> NT, 95, OS/2 Network and systems provider for JavaOne
Steve> http://www.wwsi.com/ 303.581.0800 Boulder, Colorado, USA