SPONSORED LINKS
> Hi all. I've got a 701 problem I can't figure out... I want to > hook a monitor to my thinkpad, which I do via the multiport adaptor. > When I then boot my TP, I see the self-test info and the RAM test > on both the laptop screen and the monitor, but as soon as win95 starts > booting the monitor goes blank. Any ideas? > One strange note: when win95 is running, if I go into the 701 config > utility (FN+F1), the monitor then functions properly and I see the > config screen on both the laptop and the monitor. Then when I exit > the config util, the monitor goes blank. Ever tried SETTING the 701 to display to the monitor ??? I know this may be dumb, but sometimes even I myself forget to press FN+F7 to set switch between LCD/CRT/LCD+CRT. Give it a try :) If not, try checking out the video drivers for ur vga drivers. Also, next time, try booting up the system (LCD only) and after everything starts up (after he boot sequence) then switch to CRT or LCD+CRT. (The LCD+CRT mode seems to use a lower sync freq which works on most VGA monitor) Lastly if driven to desperation, use dos. A text mode display WOULD work on any VGA monitors.. I hope :) Elvin -- +---------------------------------------------------------------------------+ | elvintan@dupre.lugs.org.sg Finger alf@pacific.net.sg for PGP Public key | | Public Key fingerprint - 2C F5 0A A6 61 A9 3C 1B DE E4 48 2F F8 34 37 B0 | +---------------------------------------------------------------------------+