SPONSORED LINKS
Thanks for the reply, Terry. Unfortunately you don't win a pint of Guinness on this occasion. The Video Controller looks quite happy - reporting that Enhanced Video is enabled, the Video In Connector is selected and the Video Capture IRQ is 9. Everything LOOKS fine. > > I requested win.ini & system.ini in the hope that I could breathe life > back > > into my Asymetrix Digital Video Capture program - it's on a TP 755CDV. > On > > examining those kindly sent, I'm still unable to get even a flicker. > > > > When I run Digital Video Capture I get a messages saying 'CAPTURE > > DEVICE WAS NOT DETECTED. Another message box then appears advising me to > > check that the capture hardware is correctly installed etc. etc. > > > > Is there any other way to check that the capture drivers are working - > > Windows 95 reports that 'this driver is working normally' from the System > > section of Control Panel. > > > > All ideas welcome. > > Not sure this will help But, There is a setup for the TP that turns tthe > Video thingy on. The TP then has to be rebooted. Hope this is any help. > > Terry