SPONSORED LINKS
I put a 19mm drive into my TP755CD using a metal carrier from PS-Solutions. I am now finding that the carrier comes loose from the TP connector because the wire handle doesn't engage with the "hold down" tabs that are used with the original TP case. I carry my machine around a lot, so I expect it is working loose from vibration. I have had scan disk errors that I assume can be attributed to bad connection. This can be very "dangerous". PS-Solutions didn't have an answer to fix it, though they are willing to have me send it back. For now, I put a piece of thick tape over the drive case at the connector end to try to get pressure from the closed keyboard to hold it in place. This isn't a very good solution in my opinion, but I'll try it for now. I am not sure if other carriers are any better. If you've tried a different carrier that utilizes the hold down tabs, I would like to know. I would switch to that. Thanks Mike Redmond