SPONSORED LINKS
SOrry I can' tbe a bit more helpful on this, but I have a 760CD (90MHz) with 16 meg of memory, and it seems to work just fine. I have the MWave stuff enabled, and I even use a Megahertz Ethernet+Modem card with it. It is a little slow when it boots, but once it is up, it flies (ok, walks). I used a blank hard drive, and installed from the I386 directory that I copied off of the ROM. I left the FAT intact, and my pagefile is around 43 meg. Perhaps try lowering you swap file size? RK ---------- >From: emr >To: thinkpad >Subject: NT 4.0 on a TP760CD P120..need more ram? >Date: Friday, November 15, 1996 11:43AM > > Have got a 760CD with 32mb of ram running NT 4.0. Boots are slow and > it does a lot of disk swapping even after it's up, so I assume I've > got a lot of things getting loaded that don't need to be. I tried > disabling MWAVE under ControlPanel/Devices (to free up some RAM) but > then it wouldn't boot and I got a blue screen dump, so had to revert > to the original configuration. Anybody got a list of things to do to > optimize a ThinkPad under NT (and how to do it if possible)? > > By the way, it is a FAT partition. Swap space is set to between 45 and > 85mb. Display is set to 32k(m?) colors. Any and all sugestions are > welcome. Thanks. >