SPONSORED LINKS
I faintly remember an authoritative source which said the answer to my problem is, "Off to EasyServe" but I wanted to check first with the knowledge base on this list: The floppy does not respond. Or rather, it responds with lights and whirrs, but then delivers a message: "The disk cannot be accessed." I have worked with combinations of port addresses and such on the bios and diags pages with no success. Upon receipt of my machine the floppy worked correctly, and did so for many months after after the Bios flash update I got from IBM. I believe I remember the incident when this trouble began: an unthinking hot-plug of the floppy after a late night. Can someone confirm hot-plugging is a no-no and EasyServe is the answer? 701cs 486-75 20 meg ram 720 hd Many thanks in advance. Phillip C. Wolf ----------------------------------------------- pcwolf philosopher-at-large beautiful Wilmington NC