SPONSORED LINKS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Disassembling a 701CS



On Wed, 11 Jun 97 13:27:24 HST, David Ross wrote:

>> The speaker in a friend's 701 sounds like it either died or
>> got unplugged (is this possible ?).
>
>Two other causes of the speaker going south are: (1) problems with the
>headphone jack.  Try pluging/unplugging/wiggling headphones until you're
>sure the jack contacts are returning to speaker mode when the 'phones
>are removed.  (2) Problems with the DSP.  Is there sound through
>headphones when you plug them in?  If not, then your DSP (rather than
>your speaker) is likely the problem.
>
>- David
>
>
>
I had the same problem with my speaker in my 701, and I tried fixing the headphone jack, which was giving 
off AC line noise when being powered through the worldwide adapter I use.  Unfortuantly, a contact on the 
jack broke loose, but now the speaker works, with distortion because I used to poke at it to get it to work.

Paul
Regards,

Paul Khoury
pkhoury@earthlink.net