SPONSORED LINKS
I had a lot of trouble installing my new modem on my TP365XD. Actually it is the second time I am trying. I first tried with a Practical Peripherals 56K PCMCIA card, and now with a Hayes Accura 56K one. On the first I couldn't get it to install at all. With the Hayes it does install, but I have a couple of problems I hope that the group can me with. 1) In order to install the modem I had to disable the serial port on COM2. The modem now uses that port. This is strange since my old modem (a Cardinal 28800 PCMCIA) used COM3. If I need that serial port back what do I do? Is it possible to switch the modem to COM3 like the other one? 2) In the Device Manager of Windows95 I have *2* entries for the modem. This may have to do with the fact that I had to abort the initial detection of the modem as it wanted to install the "Standard PCMCIA Modem" rather than the Hayes. What do I do about this; keep both or try to get rid of one? Richard M. Poniarski rponiarski@earthlink.net '95 BMW 318ti Sport The 318ti Site http://home.earthlink.net/~rponiarski/ "If you have to ask..."