SPONSORED LINKS
You might also look in the 701 setup for the parallel ports: 1. ECP is faster than EPP which is faster than a plain parallel port. 2. Your OS & program should all be pointing to the right port 3. Also look for any IRQ conflicts Which OS? Ciao, Tom _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ FROM:Tom Trottier, MBA Senior Technical Architect SHL Systemhouse Ltd. Ottawa Global Development Centre 50 O'Connor St. Suite 501, Ottawa K1P 6L2 Canada +1 613 236-6604x5539 fax 232-5182 ttrottier@shl.com ---------- From: Steve Parker[SMTP:sparker@torgo.punk.net] Sent: 1997 August 13 - Wednesday 17:49 To: Chris Michalek Cc: ThinkPad List Subject: Re: 701 and epson 800 printer On Wed, 13 Aug 1997, Chris Michalek wrote: > Has anyone else had success printing from a 701 using an epson stylus > 800? It's an awesome printer but is horribly slow when using the 701C. > The printer is fine and works well with my desktop PC, Macs and 760 but > the 701 is slow. All machines have exactly the same software. This > problem has been chewing at my for a feew weeks. The Epson techs > couldn't figure it out either. How much RAM does it have? What OS? The lack of L2 cache will probably also affect it also. How slow is slow? Does your 701c have the DX2-50 or DX4-75? ============================================================================ ==== Steve Parker ==== San Luis Obispo, CA ==== Multi-OS & Multitasking ==== ============================================================================