SPONSORED LINKS
On Thu, 28 Aug 1997 21:31:49 -0400 "Y.C Tseng" <tsengyc@tw.ibm.com> writes: >Hello, > > I just got a new Hitach 2.1 GB hard drive for my ThinkPad 760ELD. >After >putting it into my ThinkPad, >I tried to test this drive in the BIOS setup menu, then got a red >error cross >mark with the following lines: > > DEV 017 > ERR 16 > FRU 6010 > >Could someone kindly point me out what meanings do they respect to? >Thanks a >lots! > >Best regards, >Yen-chiun Tseng > Okay, first of all, is this a new drive, with no information? If so, follow the steps below: 1. Boot up the machine into Easy Setup holding Fn-F1 until you get there. 2. Go to test machine, and press CONTROL-A, you should see some new icons. 3. Then press CONTROL-F, and you should see a hard drive icon. This low-level formats the hard drive and DESTROYS everything on it, so only use it if you know what you're doing. 4. Click on it with the mouse. Press enter until you see a box that says Cylinder x or something like that. I don't want to do this, so I don't remember what it says. 5. Email me and the list, and tell me how it went. Good luck. Paul