SPONSORED LINKS
Hallo all, I have a Problem with my 365x Thinkpad to run X. All the configuration is ok, but the Display shows undefined Characters if I stop X with -ctrl alt bs-. after break my Display on remote Server shows as follows --------------------------------------------------------- XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us" (**) Mouse: type: PS/2, device: /dev/psaux, baudrate: 1200 (**) SVGA: Graphics device ID: "Trident TGUI9420DGi (generic)" (**) SVGA: Monitor ID: "Primary Monitor" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi" (--) SVGA: PCI: Trident TGUI 9320 rev 227, Memory @ 0x08000000, 0x08200000 (--) Trident chipset version: 0xa3 (Cyber9320) (--) SVGA: Revision 3. (--) SVGA: Using Trident programmable clocks (--) SVGA: chipset: tgui9320lcd (--) SVGA: videoram: 1024k (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Maximum allowed dot-clock: 80.000 MHz (--) SVGA: There is no mode definition named "800x600" (--) SVGA: Removing mode "800x600" from list of valid modes. (**) SVGA: Mode "640x480": mode clock = 25.180 (--) SVGA: There is no mode definition named "640x400" (--) SVGA: Removing mode "640x400" from list of valid modes. (--) SVGA: Virtual resolution set to 640x480 (--) SVGA: SpeedUp code selection modified because virtualX != 1024 (--) SVGA: Using Linear Frame Buffer at 0x08000000, Size 1MB (--) SVGA: Using XAA (XFree86 Acceleration Architecture) (--) SVGA: XAA: No acceleration primitives defined. xinit: connection to X server lost. waiting for X server to shut down X connection to :0.0 broken (explicit kill or server shutdown). xterm: fatal IO error 2 (Broken pipe) or KillClient on X server ":0.0" xterm: fatal IO error 2 (Broken pipe) or KillClient on X server ":0.0" who can help best regards ..... Gerd