[701C] Warp 4 Install

[Joe Suttle <joesuttle@ibm.net>]

Has anyone out there successfully installed Warp 4 on a 701C. Managed to
get all the right files unpacked off the CD and added to Disk 1, along
with the drivers for the portable CD. Install seemed to work ok, but
cannot get to parallel port or serial port on Replicator. When I FN-F1,
and look at the Multiport, it shows serial and parallel disabled.
Finally got parallel back, but only for printer. Parallel tape backup
fails. System has a Panasonic SCSI PC card for CD-Rom and IBM Home and
AWay Ethernet/Modem combo. RMVIEW shows that the two PC cards take over
irq 3 & 4, and even when I change the H&Away adapter in 'protocol.ini',
can't get the modem to work. System keeps giving me messages for all com
ports as not enabled! Any ideas out there?
-- 
+----------------------------------------------------------------------+
| Joe Suttle              |  Certified OS/2 Engineer                   |
| joesuttle@ibm.net       |  Powered by OS/2 Warp 4, OS/2 Warp Server  |
| Hercules, California    |     and Netscape for OS/2                  |
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
| Success is getting what you want. Happiness is wanting what you get. |
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+