#
#<ITEM>
#<DATE>    1999/10/21
#<NAME>    Chris Hanson
#<ADDR>    cph@zurich.ai.mit.edu
#<MCN>     IBM ThinkPad 755c
#<CPU>     Intel 486 DX4 75 MHz
#<BIOS>    1.42
#<OS>      Debian GNU/Linux
#<OSV>     1.3
#<XFRV>    XFree86 3.3
#<XFRS>    XF86_SVGA
#<VCHIP>   Western Digital wd90c24
#<VRAM>    1Mbytes
#<VDEPTH>  8bpp
#<RESOL>   640 x 480
#<LCDSIZE> 10.5 inches
#<LCDTYPE> TFT
#</ITEM>
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file. This man page is installed as /usr/X11R6/man/man5/XF86Config.5x 
# **********************************************************************

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

    FontPath	"/usr/X11R6/lib/X11/fonts/misc/"
#    FontPath	"/usr/X11R6/lib/X11/fonts/Type1/"
#    FontPath	"/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/"
#    FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    DontZoom

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

    Protocol	"Standard"

# when using XQUEUE, comment out the above line, and uncomment the
# following line

#    Protocol	"Xqueue"

    AutoRepeat	500 5

# Let the server do the NumLock processing.  This should only be required
# when using pre-R6 clients
#    ServerNumLock

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Xleds      1 2 3

# To set the LeftAlt to Meta, RightAlt key to ModeShift, 
# RightCtl key to Compose, and ScrollLock key to ModeLock:

    LeftAlt     Meta
#    RightAlt    ModeShift
#    RightCtl    Compose
#    ScrollLock  ModeLock

EndSection


# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"

    Protocol	"PS/2"
    Device	"/dev/psaux"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate	9600
#    SampleRate	150

# Emulate3Buttons is an option for 2-button Microsoft mice

    Emulate3Buttons

# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle

EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier "NEC XE15"
    VendorName "NEC"
    ModelName "XE15"
    BandWidth 85.0
    HorizSync 31-65
    VertRefresh 55-120
#
# 640x480@63Hz Non-Interlaced mode (non-standard)
# Horizontal Sync = 32.8kHz
# Timing: H=(1.41us, 1.41us, 5.08us) V=(0.24ms, 0.092ms, 0.92ms)
#
    ModeLine "640x480.63"  28.322  640  680  720  864    480  488  491  521
#
# VESA 640x480@72Hz Non-Interlaced mode
# Horizontal Sync = 37.9kHz
# Timing: H=(0.76us, 1.27us, 4.06us) V=(0.24ms, 0.079ms, 0.74ms)
#
    ModeLine "640x480.72"  31.5    640  664  704  832    480  489  492  520
EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    # SVGA server auto-detected chipset
    Identifier	"ThinkPad 755C Video"
    VendorName	"Western Digital"
    BoardName	"Unknown"
    Chipset	"wd90c24"
    Clocks      25.175 28.322 65     36     # These are *not* programmable
    Clocks      29.979 77.408 62.195 59.957 # these are programmable
    Clocks      31.5   35.501 75.166 50.114 # these are *not* programmable
    Clocks      39.822 72.038 44.744 80.092 # these are programmable
    Clocks      44.297                      # Change this if you change Mclk
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# The colour SVGA server

Section "Screen"
    Driver  "SVGA"
    Device  "ThinkPad 755C Video"
    Monitor "NEC XE15"
    Subsection "Display"
	Depth		8
	Modes		"640x480.72" "640x480.63"
	Virtual		640 480
	ViewPort	0 0
    EndSubsection
EndSection