SPONSORED LINKS
---------- Forwarded message ---------- Date: Mon, 8 Jan 1996 17:35:46 -0800 (PST) From: Jay Shaw <jrshaw@get.wired.com> To: "Kurtis D. Rader" <krader@sequent.com> Subject: Re: MWave Modem That fixed it. I just had to run the THinkPad Features program. Thanks for the help Jay On Mon, 8 Jan 1996, Kurtis D. Rader wrote: > At 16:27 08-01-96 -0800, you wrote: > >I had my Mwave modem running fine until I installed a Megahertz ethernet > >card. I've tried re-installing the mwave drivers at 14.4 and 28.8, but > >neither seems to work. Terminal programs think that the port is invalid > >somehow. Any Ideas? > > I also had major difficulty getting it to work under Win95. Install the > MWave v2.00 drivers. Then use the ThinkPad Features program to enable > the DSP and MWave on COM2:. Then use the "Add Hardware" wizard to > manually add the MWave modem and a standard serial interface (drivers > are serialui.dll and serial.vxd). Set the port settings to 115200bps, > 8bits, no parity, 1 stop, hardware flow control. I also find it > necessary to use the "PCIC or compatible PCMCIA controller on IBM > system" driver for the PCMCIA interface rather than the generic Win95 > PCIC support. > > -- Kurtis D. Rader, x8,3714 > -- Sr. Technical Consultant > -- (currently in Portland) > >