SPONSORED LINKS
According to my memory (and my Adaptec High Performance Bus Manual), "If both SCSI and non-SCSI disk drives are installed, then the non-SCSI drive is always the boot device." Only alternative is to remove/disable the non-SCSI and then you can boot from the SCSI. I hope that helps.. Alex > > Okay, here's the deal: > > TP750C/36 Mb RAM > 340 internal HD > > Dock II w/ internal IDE HD > External SCSI HD on ID#0 > > I can't boot off the SCSI even after setting the BIOS to boot HD#3 in the > startup options. If I disconnect the Dock II's IDE and set the BIOS to boot > HD#2, I can boot off the SCSI drive w/ no problems. ARRRRGH. Why can't I > boot off HD#3???? IBM seems to indicate that I can boot off any of the HDs... > >