SPONSORED LINKS
I an rather confused, I have my thinkpad plugged into the wall power adapter and have set the power management for external power to Custom and have cranked the times way up like 35 minutes to suspend, 45 minutes to sleep and yet it still acts like it is running under batery power, the light for the external charge is on on the light bar at the hinge. I even rebooted to make sure the bios changes took. Are these settings supposed to be made in the config/autoexec files? On IBM AV, all of the sudden I am being told that the program is too big for my available memory: I have no pcmcia supprort, no other drivers, in fact the mem.exe tells me that I have 611k of memory available and largest program size is 610k. What is going on? I am using the original config.sys and autoexec.bat files, I have attached them as well. Windows now tells me that it can not run because it needs an exclusion at B007, even though I have it excluded in the emm386 line. Huh? If anyone can help me out, I would really appreciate it. I am rather frazzled and discouraged at this point, I am contemplating to wipe the HD and start over from scratch. Sincerely,
REM TP701 @ECHO OFF PROMPT $p$g PATH=C:\;C:\DOS;C:\WINDOWS;C:\CCMOBILE;C:\COMPEL;C:\THINKPAD; SET TEMP=C:\WINDOWS\TEMP SET IBMAV=C:\DOS SET IPF_PATH=C:\IPFWIN SET COMSPEC=C:\DOS\COMMAND.COM REM to disable write caching, remove '+' from the following line LOADHIGH C:\DOS\SMARTDRV.EXE C+ LOADHIGH C:\DOS\MOUSE.COM /Y LOADHIGH C:\DOS\DOSKEY.COM LOADHIGH C:\DOS\SHARE.EXE /F:4000 /L:40 CALL C:\DOS\IBMAVDR.BAT C:\DOS\ REM following line erases OS/2 swapper.dat file not used in DOS/WINDOWS CALL C:\SCREENS\ER_SYS.EXE WIN
DEVICE=C:\DOS\HIMEM.SYS DOS=HIGH,UMB FILES=30 BUFFERS=10 STACKS=9,256 SHELL=C:\DOS\COMMAND.COM C:\DOS /P DEVICE=C:\DOS\EMM386.EXE NOEMS I=B000-B7FF X=CC00-CFFF DEVICEHIGH=C:\THINKPAD\IBMDSS01.SYS DEVICEHIGH=C:\THINKPAD\IBMDOSCS.SYS DEVICEHIGH=C:\THINKPAD\DICRMU01.SYS /MA=CC00-CFFF /SH=1 DEVICEHIGH=C:\DOS\POWER.EXE DEVICEHIGH=C:\THINKPAD\AUTODRV.SYS C:\THINKPAD\AUTODRV.INI REM REM UN'REM' THE FOLLOWING LINE FOR PCMCIA ATA SUPPORT REM DEVICEHIGH=C:\THINKPAD\DISKDRV.SYS REM UN'REM' THE FOLLOWING LINE FOR A SPECIFIC DOS VERSION SUPPORT REM DEVICEHIGH=C:\DOS\SETVER.EXE
Dennis ---------------------------------------------------------------------------- ------------------------------------------------------------------------- Dennis Pantazis My opinions and ideas are my own, and <pantazis@uiuc.edu> can not be interpreted as extensions of the Graduate Student in Civil Engineering University's official policies, untill they University of Illinois-Urbana decide my ideas are worth money to the (the Extended Tour of Duty continues) institution. You can see us at http://www.students.uiuc.edu/~pantazis !!!!! ---------------------------------------------------------------------------- -------------------------------------------------------------------