Re: 701 and PC Card Services

[Bill Bryan <billb@rust.net>]

At 05:24 PM 8/6/96 -0700, you wrote:
>     I just added a Megahertz 10BaseT PC card to my 701.  I am
>     quite confused because EZPlay reports that the card is not
>     ready.  However, if I actually load-up the Netware ODI
>     drivers, the card (and then my Thinkpad) talks to the
>     network.
>     
>     I suppose that I shouldn't complain if the card is working.
>     But is there any good reason why IBM's Card services through
>     both DOS and Win 3.11 report the card as "Not Ready"?
>     
>     Thanks,
>     
>     Mitchell
>     mitchell_yee@jud.ca.gov
>

I have included a copy of part of my config.sys file that pertains to the
pcmcia stuff.  I'm running Win 3.11.  Perhaps some of your code is missing
or patched out by some other program installer.  I have a file on my 701C
that came with the machine,  documenting each line in the file.  One is
called config.doc and the other is autoexec.doc

        DEVICE=C:\DOS\EMM386.EXE NOEMS I=B000-B7FF X=CC00-CFFF
        DEVICEHIGH=C:\THINKPAD\IBMDSS01.SYS
        DEVICEHIGH=C:\THINKPAD\IBMDOSCS.SYS
        DEVICEHIGH=C:\THINKPAD\DICRMU01.SYS /MA=CC00-CFFF /SH=1
        DEVICEHIGH=C:\THINKPAD\$ICPMDOS.SYS
        DEVICEHIGH=C:\DOS\POWER.EXE
        DEVICEHIGH=C:\THINKPAD\AUTODRV.SYS C:\THINKPAD\AUTODRV.INI
        rem UN'REM if using pcmcia disk drives b/b
        rem DEVICEHIGH=C:\THINKPAD\DISKDRV.SYS

        REM UN'REM' the following line for PCMCIA ATA support
        REM UN'REM' the following line for a specific DOS version support
        REM DEVICEHIGH=C:\DOS\SETVER.EXE

 
B/B
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
 Bill Bryan, Livonia, MI - billb@rust.net - N8QPI - www.rust.net/~billb
 Who would cross the Bridge of Death must answer me these questions
 three ere the other side he see."             Bridgekeeper, Holy Grail
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=