Re: 701 and PC Card Services

[Michael Verne/VENTANA <Michael_Verne/VENTANA.ITP@lgate.vmedia.com>]

"...    DEVICE=C:\DOS\EMM386.EXE NOEMS I=B000-B7FF X=CC00-CFFF
        DEVICEHIGH=C:\THINKPAD\IBMDSS01.SYS
        DEVICEHIGH=C:\THINKPAD\IBMDOSCS.SYS
        DEVICEHIGH=C:\THINKPAD\DICRMU01.SYS /MA=CC00-CFFF /SH=1
        DEVICEHIGH=C:\THINKPAD\$ICPMDOS.SYS
        DEVICEHIGH=C:\DOS\POWER.EXE
        DEVICEHIGH=C:\THINKPAD\AUTODRV.SYS C:\THINKPAD\AUTODRV.INI
        rem UN'REM if using pcmcia disk drives b/b
        rem DEVICEHIGH=C:\THINKPAD\DISKDRV.SYS..."

~~~~~
i don't know if this applies to the megahertz, but i've found that the xircom 
drivers won't load in the autoexec if the resource map utility and autodriver 
are loaded.  i'd try rem'ing out all these lines except emm386.exe, 
ibmdss01.sys, and ibmdoscs.sys.  of course, i had to make a menu out of the 
config.sys, so the other drivers could load when i wasn't on the network 
because my usr sportster required them.


Michael J. Verne
Systems Administrator, Ventana Communications Group
michael_verne@vmedia.com
http://www.vmedia.com/michaelv/
-------------------------------
If you board the wrong train, it's no use running along the corridor
in the other direction.    --Dietrich Bonhoeffer