SPONSORED LINKS
Victor,
I am not really sure if I am using the latest warp driver. But it
re-initializes 3c589 card every time my thinkpad is awakened from
hybernation. The problem is that this re-initialization does not reset
the tranceiver mode. According to the log, which you can check with
3net_log command, the tranceiver mode is selected only when the driver
is loaded. So, the driver only talks with the tranceiver that is
active when the machine is booted. Does the driver on your machine
behave differently?
Shinichi
>>>>> "Victor" == Victor Kress <kress@ctpsun.ciw.edu> writes:
Victor> This won't help the win95 folks, but with the latest
Victor> drivers under warp, the 3com 3c589 card re-initializes
Victor> when coming out of hybernate, or when hot plugged. This
Victor> should take care of it.
Victor> ---------------------------- Victor Kress Geophysical
Victor> Laboratory 5251 Broad Branch Road N.W. Washington,
Victor> D.C. 20015-1305 (202) 686-2410 x2489 web page:
Victor> http://granite.ciw.edu/~kress ---------------------------
--
=============================================================================
Shinichi Sakata, Ph.D.
The University of Michigan Internet: ssakata@umich.edu
Department of Economics Phone: (313) 764-2368 / 2355
240 Lorch Hall, 1220 Fax: (313) 764-2769
611 Tappan Street
Ann Arbor, MI 48109-1220
=============================================================================