SPONSORED LINKS
I tried out a hunch and downloaded the enhanced video drivers for win95 for the 760CD to try out on my 755CD. The video capture card on both of them is the V7320 so I figured they might work. And in fact they do, and it gives you an additional feature, an MCI overlay driver which you can use from win95 media player that gives you a video in window that you can resize dynamically by just clicking on the corners and stretching it. There is one caveat however, for some reason you must use your original V7320APM.EXE driver that is loaded in you config.sys, so before you install these drivers make a copy of v7320apm.exe under a different name then copy it back. If you use the one that comes with the 760cd disk, then the video input window will not work after resuming from suspend mode if it was open when you went into suspend mode. The file to get from the IBM ftp site is vetpfw95.exe. Perhaps if someone from IBM is reading this they could change the files on the ftp site so that at least the mci overlay driver is included with 755cd dtiver diskette. The changes the vetpfw95.exe file will make to your config files are as follows: config.sys: replaces v7320apm.exe and v7320mgr.exe system.ini: in [boot] on drivers= adds c:\v7320\v7320pnl.dll in [386enh] replaces v7320.386 with new version in [drivers] replaces v7320cap.drv and v7320rdr.drv with .dll versions in [MCI] ads Overlay=v7320ovl.dll Remember for it to work properly (this was my experience) with suspend/resume you must use your old v7320apm.exe in config.sys, all the other files you can let it overwrite. Josh Hosseinof hosseino@yu1.yu.edu