SPONSORED LINKS
IBM's doc file for installing NT 4.0 on Thinkpads mentions that the MWAVE driver is currently Class 2 compliant only. NT Personal Fax only supports Class One...... Get the file at: ftp://204.146.167.81/pub/pccbbs/mobiles/tpwint40.txt and take a look at "2.1.8.2 Tips for Mwave/DSP Feature program" > o Currently, the following features are not provided: > > - Speaker phone/answering machine > - SoundBlaster game support > - Class-1 FAX -----Original Message----- From: Alain Jacques [SMTP:jacques@columbia.cpmc.ucl.ac.be] Sent: Friday, March 07, 1997 3:06 PM To: Richard Chalk Cc: thinkpad@cs.utk.edu Subject: Re: TP MWAVE and NT Fax preview 2 At 08:46 07/03/97 -0500, you wrote: >If the installation of MWave was working OK as a regular modem, then try >selecting the modem manually, rather than having the program look for it. > >Make sure you set up the ports i/o and IRQ manually, as in the README.TXT >file for MWave install on WindowsNT. > >Hope this helps... Thanks for the reply ... but doesn't help. My Mwave system is working under NT. The Unimodem driver is installed, I'm using it for RAS connection ... no problem with it. When I installed the NT fax preview version 2 from Micro$osft, the corresponding setup doesn't recognize the Mwave system as a class 1 fax device. There is no 'manual' way to override this. The setup simply says 'No class 1 fax detected' ... bye,bye that's all folks. Then I had a look on IBM docs ... no mention about the fact that Mwave is or is not class 1 or class 2 compliant. So, does anyone know how to recognize a class 1 fax system i.e. what are the correponding AT commands? Or if someone has installed a fax utility software on a Mwave ThinkPad system, under which category the Mwave fax is recognized? Regards, Alain