SPONSORED LINKS
On Thu, 28 Aug 1997 07:08:30 -0700 Dale Chao <geige@usa.net> writes: >Bill, > >At 11:33 AM 8/27/97 -0700, Bill Pratt wrote: >>Also, when I undock from the Multiport connector and run it undocked, >I >>loose my modem setup. The modem will only seem to work at com3, and >only >>when docked. >> >Have you looked in the System applet in the Control Panel? In there, >you >should check the device sheet, then modems, then the modem that's >giving >you problems. See if it's enabled under both docked and undocked >hardware >profiles. I think that might take care of your problem. > >As for the modem being on COM3, on my TP701, the internal modem is on >COM1, >the serial port on the Multiport is on COM2, leaving COM3 for the next >modem. > > Dale > What OS are you running? Paul