SPONSORED LINKS
Bob the first thing I would recommend is to go with as plain vanilla setting as you can. Once you get it to work then you can try new stuff. Some suggestions: 1) Use VGA16 server (SVGA may imply resolutions above 640x480) 2) If it still doesn't work try 50Mhz setting for the monitor (Or whatever option 1 is on that list :-)). 3) If still doesn't work leave RAMDAC and clock setting unset and let XF86Config come up with the values. Rudy ---Bob Angell <aims@gte.net> wrote: > > I have been trying for the last several hours to get the right > settings to work for a Thinkpad 755CE and Xfree386. Has anyone > got this working and would be willing to send me their config > file for this? (or just basically tell me what I might be doing > wrong - as I have got this working on other systems ...). HW > specs are as follows: > > Thinkpad 755CE (486/DX4/100 w/40MB RAM) > Video WD90c24 with 1MG of video ram. > Under OS/2, Windows, etc. this box can > only do 640x480x65M colors .... > > Currently I have selected the SVGA server, > WD90c24 chipset, RAMDAC-Normal, and have > let it probe the clock settings. I have > also just selected the VGA monitor at 31Hz. > > Any/all help on this would be greatly appreciated. Thanks. > > -Bob- > -- > Bob Angell, Principal - Sys. Engineer/Author/Consultant > Applied Info & Mgnt Sys, 1238 Fenway Ave., SLC, UT 84102 > v801-583-8544 mailto:aimsllc@ibm.net mailto:aims@gte.net > -------------------------------------------------------- > http://home1.gte.net/aims/index.htm > -------------------------------------------------------- > "Had Mama Cass and Karen Carpenter shared that Ham sand- > wich, they would both be with us today!" > _________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com