SPONSORED LINKS
Here is the output of X -probeonly and XF86Config. The mouse device does not
work.
I changed it to point to PSAUX from TTYS0, but no results. GPM cursor in the
console
mode also does not respond.
Thank you for your help in advance.
SubbaRao
subb3@ibm.net
/etc/XF86Config
=============
# XF86Config file for TP365XD, TP760CD, TP760ELD, TP760ED Standard Video
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Keyboard"
Protocol "Standard"
AutoRepeat 500 5
XkbDisable
# XkbKeymap "xfree86(us)"
LeftAlt Meta
RightAlt ModeShift
# RightCtl Compose
ScrollLock ModeLock
EndSection
Section "Pointer"
Protocol "PS/2"
Device "/dev/mouse"
Emulate3Buttons
Emulate3Timeout 50
EndSection
Section "Monitor"
Identifier "ThinkPad"
VendorName "ThinkPad"
ModelName "ThinkPad"
HorizSync 30 - 80 # kHz
VertRefresh 40-150 # Hz
Modeline "640x480-60" 25.175 640 664 760 800 480 491 493 525
Modeline "640x480-72" 31.5 640 680 720 864 480 488 491 521
Modeline "800x600-56" 36 800 824 896 1024 600 601 603 625
Modeline "800x600-60" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
Modeline "800x600-72" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
Modeline "1024x768-87" 44.9 1024 1040 1236 1264 768 769 777 817
Interlace
# Modeline "1024x768-60" 65 1024 1048 1184 1344 768 771 779
806 -hsync -vsync
# Modeline "1024x768-60" 65 1024 1088 1224 1344 768 771 779
806 -hsync -vsync
Modeline "1024x768-60" 65 1024 1112 1248 1344 768 771 779
806 -hsync -vsync
# Modeline "1024x768-70" 75 1024 1088 1224 1328 768 771 779
806 -hsync -vsync
# 65 Hz / 53 kHz (works with 9660xgi)
# Modeline "1024x768-70" 70 1024 1088 1224 1328 768 771 779
806 -hsync -vsync
# 67 Hz / 54.3 kHz (starts to flicker with 9660xgi, OK with 9440agi)
# Modeline "1024x768-70" 72 1024 1088 1224 1328 768 771 779
806 -hsync -vsync
# 70 Hz, 56 kHz (flickers slightly with 9440agi)
# Modeline "1024x768-70" 73 1024 1088 1224 1302 768 771 779
806 -hsync -vsync
# 69 Hz, 55.6 kHz (OK with 9440agi)
# Modeline "1024x768-70" 72 1024 1088 1224 1302 768 771 779
806 -hsync -vsync
# 70 Hz, 56.7 kHz (OK with 9440agi)
# Modeline "1024x768-70" 72 1024 1072 1224 1272 768 771 779
806 -hsync -vsync
# 71 Hz, 57.4 kHz (OK with 9440agi)
Modeline "1024x768-70" 72 1024 1056 1192 1256 768 771 779
806 -hsync -vsync
Modeline "1024x768-75" 75 1024 1080 1224 1296 768 771 779
806 -hsync -vsync
Modeline "960x720-75" 65 960 992 1288 1320 720 725 730 756
# Modeline "1152x900"
EndSection
Section "Device"
Identifier "tgui9320"
VendorName "tgui9320"
BoardName "tgui9320"
ChipSet "tgui9440agi"
# VideoRam 1024
EndSection
Section "Screen"
Driver "svga"
Device "tgui9320"
Monitor "ThinkPad"
Subsection "Display"
Depth 8
Modes "800x600-56" "1024x768-70" "640x480-60"
ViewPort 0 0
Virtual 1024 768
EndSubsection
EndSection
Output of X -probeonly
==================
XFree86 Version 3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: August 4 1997
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.30 i586 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, et3000, pvga1, wd90c00,
wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201,
sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c,
tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr,
tgui9320lcd, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
tgui9440agi, tgui96xx, cyber938x, clgd5420, clgd5422, clgd5424,
clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446,
clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225,
clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22,
ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, oti067, oti077,
oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401,
cl6410, cl6412, cl6420, cl6440, video7, ct65520, ct65525, ct65530,
ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554,
ct65555, ct68554, ct64200, ct64300, ark1000vl, ark1000pv, ark2000pv,
ark2000mt, mx, realtek, AP6422, AT24, s3_virge, generic
(using VT number 7)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: disabled
(**) Mouse: type: PS/2, device: /dev/mouse, baudrate: 1200,
3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "tgui9320"
(**) SVGA: Monitor ID: "ThinkPad"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/us
r/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/
X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X
11/fonts/100dpi/"
(--) SVGA: PCI: Trident TGUI 9320 rev 227, Memory @ 0x08000000, 0x08200000
(--) SVGA: Revision 3.
(--) SVGA: Using Trident programmable clocks
(**) SVGA: chipset: tgui9430dgi
(--) SVGA: videoram: 1024k
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 80.000 MHz
(**) SVGA: Mode "800x600-56": mode clock = 36.000
(**) SVGA: Mode "1024x768-70": mode clock = 72.000
(**) SVGA: Mode "640x480-60": mode clock = 25.175
(**) SVGA: Virtual resolution set to 1024x768
(--) SVGA: Generic SpeedUps selected (Flags=0x30)
(--) SVGA: Using Linear Frame Buffer at 0x08000000, Size 1MB
(--) SVGA: Using Graphics Engine.
(--) SVGA: Using 1024 byte display width.
-----Original Message-----
From: Harald Milz <hm@seneca.muc.de>
To: thinkpad@cs.utk.edu <thinkpad@cs.utk.edu>
Date: Saturday, January 17, 1998 12:03 PM
Subject: Re: XF86Config for 760EL
>Subba Rao (subb3@ibm.net) wrote:
>> SuperProbe Version 2.15 (4 August 1997)
>
>PLEASE run "X -probeonly" and post the output as well as the
>XF86Config file that relates to the output. I know what SuperProbe says
>on that machine which I own myself.
>
>