SPONSORED LINKS
I had the same problem with my 765d. I fixed it by the following: Remove the serial port from the device manager. Reboot and go into the bios setup and initialize the thinkpad. Reboot and that should do it. You will need to reset all your other options when you do this. Richard Hamel Jukka Ketelaars wrote: > Hi, > > Whatever I try, the COM1 port on my 760EL remains turned off, it > produces no > output whatsoever. The cause seems to be W95 (I'm using OSR2), because > when > I run the startup diagnostics, everything goes fine, and the signal > stays > up, until W95 boots. > > COM1 looks fine in the device manager, with no conflicts (the modem is > on > COM2, and IR on COM3). In the Thinkpad Configuration (I use the new > W95 > version) the serial port is enabled. The BIOS version is 25/9/97. > Turning > off power mgmt doesn't seem to work either. > > Any ideas? > > TIA, Jukka