SPONSORED LINKS
I think the cost of Warp Connect vs. Warp 4, would make it more logical to go with Warp 4. --I've never run Warp Connect, but I've run Warp 3 and Warp 4 on a DX50 with 16mb. Whether they are tolerable or not depends upon you've seen either on a faster machine. Personally, I would go with Warp 4 and only install the network features that you really have to have, and look for more memory too. FWIW, the minimun ram unsed for networking under Warp 4 are: The remote access client, 6mb of ram File & Print Client, 4 mb TCP/IP Service, 4mb Netware Client, 2mb Newwork & Protocol Services, 2mb System Management client, 1mb >I've just purchase a refurbrished 701C (DX75 >16MB 720MB). >On balance, which version of OS2 is better >suited to this machine to gain the best >application performance? >The machine will be configured for network >access, but no MM functions, and will probably >substitute PC2 for the WPS. >Can folks out there comment on the performance >differences between Warp 4 and 3 on this >hardware? >TIA, >Michael Cole >cole@griffoninc.com >Michael Cole >Griffon Associates >cole@griffoninc.com -- ----------------------------------------------------------- letoured@sover.net -----------------------------------------------------------