Autonomous SmartDesk with TiMotion TC15 controller doesn’t move

Okay, this will be a short post.  If your adjustable desk won’t move and it has the TiMotion controller, do this:

  1. Unplug the controller until the green LED goes out.
  2. Plug the controller back in.
  3. Hold the up and down buttons on the front panel simultaneously for 3 seconds, or until the motor relocates the base to the bottom and beeps once.

Then your desk will work again!

Here are the specifications and user manual.  For reference, I verified the power supply board provides 32VDC to the controller board, and the controller board provides 5VDC to the motion base motors.

Leave a Reply