SPONSORED LINKS
On Fri, 9 Jun 1995, Eugene Fiume wrote: > So, I'm in Grenoble Geshuntheight > The problem is this: when I try to dial using the modem (ATD in > terminal, or "dial" in kermit), I get the response "no dial tone". > However, if I first open the line (AT H1 in Hayes parlance), and then > do an ATD..., I am able to dial out and connect just fine, using either > pulse or tone dialing. A far easier solution would to be to change your dialing string to atx1d, which almost always stands for do not wait for dialtone on hayes command set modems.