[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: TP/Zip/CDROM
I'm using a 701C with an ADAPTEC Slim SCSI connected to a a Sony 4X CDROM
and a ZIP drive. No problem!! BTW- It doesn't matter what order you put
the CD or ZIP. Its all a matter of terminating the last device.
I think the panasonic SCSI is the source of your problem. I was told that
the panasonic SCSI intersface WILL NOT work with anything other than the
Panasonic CDROM, even though the CDROM will work with other SCSIs.
At 10:49 AM 2/14/97 -0500, you wrote:
>Greetings!
>
> | TP 750C | | Iomega | | Panasonic |
> | DOS 6.22 |<--->| Zip |<--->| KXL-D720 |
> | Win 3.11 | | Drive | | 2X CDROM |
> | 20 MB RAM | | (SCSI) |
> | 340 MB HD |
> | SCSI PCMCIA |
>
>If you have experience with a similar setup, I would really like to hear
>you comments on a few problems.
>
>The SCSI PCMCIA card is the one which came with the Panasonic CD-ROM
>drive. Physically, the components are linked in the order shown above; the
>total length of cable (including adapters) is less than 3 feet. The Zip
>drive is NOT set to be a terminator. Recently I had to re-install the
>whole system, and I'm having trouble getting everything running smoothly.
>I have juggled a few parameters without a lot of success. Do you have a
>copy of a CONFIG.SYS and AUTOEXEC.BAT that I could look at?
>Suggestions?... Basically the system hangs *sometimes* (the problem is not
>exactly reproducible!) either when looking for a drive letter for the Zip
>Drive, or soon afterwards (the HD drive activity remains ON, by the way).
>
>Also, intermittently, on leaving Windows or soon after that, the system
>hangs and says that EMM386 has detected an error #6. Does anyone have a
>list of these errors? And since we're on the EMM topic, what memory can
>be included and excluded to optimize memory usage? HELP EMM386.EXE NOTES
>suggests that SMARTDRV /double_buffer should be included in CONFIG.SYS
>when SCSI devices are used. Does anyone have any idea why? And should this
>be included before or after EMM386 gets loaded? (I have tried both and
>noticed no difference, but as my system is acting up every now and then,
>I can't be conclusive about this.)
>
>Enough questions for a single message. Many thanks in anticipation for
>your comments on these issues - especially in getting the Zip drive and
>CD-ROM to communicate flawlessly with the old TP...
>
>--
>Paulo Magalhaes * Dept. Neurology, Columbia University, New York, USA
>voice: (+1 212) 305 1665 ** fax: ... 305 3986 ** pm119@columbia.edu
>
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.2
mQCNAzLrCf8AAAEEANEL1//KVcF04uwigiWqAC/Pnl73jMHB2fzDggYbmvfRvzLZ
1f37qdHcvbIAcEyduKCMAcg279Lo+Xts79w2D07j8c+F0tGOuNnx2+ee6nE6cbT+
twV1+eqBvnribc8hBkfxKF11wZW3zfUX/wKRfWB0Jj/r9k8Z4ykzcunu+3e5AAUR
tC1WaWN0b3IgTS4gR29uemFsZXogPHZpY2dvbnpsZXpAaW50ZXJzZXJmLm5ldD4=
=bebi
-----END PGP PUBLIC KEY BLOCK-----