SPONSORED LINKS
Dave, I was wondering if you knew of a way to configure your XF86Config file so you can use either 1024x768 on an external monitor or 640x480 on the LCD. (I'm just guessing the 750's had a 640x480 screen). Currently I have a seperate one for each resolution and haven't figured out how to get it all into one. Thanks, -Mike On 24-Mar-97 Dave Ahn wrote: >This information may be useful for TP750 users (as well as any other who >have laptops with WD90C24). Unlike as implied in the Video drivers diskette, >1024x768 at 60Hz is not the maximum refresh rate possible on an external >monitor. The IBM Vesa drivers only let you select up to 60Hz, but the >WD90C24 can be driven safely at 1024x768 at 70Hz using a 74MHz dot clock. >Still a higher clock of 79MHz is supported, which should yield just below >a 72Hz refresh rate. Unfortunately, these higher clocks won't be of much >use to non X users. > >Regards, >Dave. >-- >Dave Ahn, ahn@vec.bgsm.edu "When you were born you cried, and the > ahn@indigo2.rad.bgsm.edu world rejoiced. Try to live your life >Virtual Endoscopy Center so that when you die you will rejoice, >Bowman Gray School of Medicine and the world will cry." -1/2 jj^2 -- mfukatsu@hertz.elee.calpoly.edu mfukatsu@cymbal.aix.calpoly.edu http://www.elee.calpoly.edu/~mfukatsu/