RE: need 701 hard drive

[<cblaisd@mail.tdl.com>]

On 21 Jan 98 at 20:51, Lewis Mills wrote:

> I believe that any hard drive that is a 2.5" form factor, standard notebook 
> IDE interface, and no more than about 12.7mm high will fit into the caddy 
> that holds your current drive

How difficult is it to swap out the drive?  I've looked at 
caddy/drive and it's not obvious (at least to me : -(  ) how one goes 
about taking out the old drive and putting in the new.

Thanks.